Replacement gasket for vintage Revere Ware 4 qt 8 inch pressure cookers
These are substitute gaskets for vintage era Revere Ware 4-quart (8 inch) pressure cookers. These gaskets are recently made and are created specifically for Revere Ware 4 qt vintage pressure cookers.
Materials: Food grade silicone rubber
Incorporates: Gasket only
Measurements: 8 in (200mm) in diameter, .59 in (16mm) thick.
Suits: Classic era 8 inch 4 quart pressure cookers. See photographs underneath to make positive yours seems like them.
This gasket will only in shape the older 4 quart pressure cooker. This gasket will not in shape newer 4 quart and 6 quart pressure cookers characterised by the hefty metal pressure regulator created to search like a Revere Ware knob.
Replaces: The authentic Revere element was called "cover gasket element no. 600".
Troubleshooting: If steam is escaping all around the gasket, make positive it is inserted. If it is in upside down, it will not seal effectively.
According to the guide for these pressure cookers, an additional result in of leakage could occur from drinking water between the gasket and the lid. Just before inserting the gasket in the lid for use, make positive each the gasket and the lid are dry.